2016 KraftMaid Spec Book - Lowes

Publish date: 2024-05-05

M1

LED Lighting

Decorative Enhancements

LED Lighting

Construction Options and

Modifications

LED is an energy efficient source for kitchen and bath lighting needs.

Puck and strip lights have 3000K light color (warm white). All products are 24V DC power. All wires are white.

Each LED light is tested at 50,000 hours of run time. LED products carry a limited warranty.

Specifications are subject to change without notice.

LED

code

LED Flexible Strip Tape Light

LED Flexible Strip Tape Light

LED•TPL

LED Flexible Strip Splash Proof Tape Light

LED•TPLSP

LED Flexible Strip Tape Light Kit

LED•TPL•KIT

• Kit includes: (1) LED Flexible Strip Tape Light

(LED•TPL)

(1) DayBreak Dimmable Driver 18W

(LED•DDR18)

(2) 8’ Power Cables (LED•PC)

(2) 8’ Power Extension Cables (LED•PEC8)

(2) End-to-End Connectors (LED•ETEC)

(3) Connector Kits for Wire Length (LED•CLC)

(1) Stranded Copper Wire (LED•SCW25)

• Standard LED flexible strip tape with self adhesive

backing

• 16.4’ long; 0.32” wide; ~0.15” tall; 300 diodes; 18W

• Warm white illumination

• 120 degree beam angle, 84 lumens per foot

• A power cable (LED.PC) is required to connect strip tape

lighting to a power supply. Strip tape lengths

cannot

exceed 16.4’ out of a single power supply port. An

additional power cable (LED.PC) plugged into an unused

power supply port is required for applications exceeding

16.4’. Make sure power supplies are

not

overloaded

based on watt capacity. See “LED Power Supply” section

for capacity details

• For use under-cabinet, over-cabinet, toe kick and cabinet

interiors

• Use LED•TPLSP for splash zones i.e. toe-kick space

• Custom lengths can be cut in increments of 2”,

not

to exceed a total of 16.4’. Use End-to-End Connector

(LED•ETEC) to join custom lengths

• Use Connector Kit for Custom Wire Length (LED•CLC)

with Standard Copper Wire (LED•SCW25) to navigate

corners or other obstacles

• Use Motion Sensor Switch (LED•MSS) for controlling

interior cabinet lighting

• Use 8’ Power Extension Cables (LED•PEC8) to increase

distance between power supply and beginning of LED

flexible strip run

Installers

must

clean and prepare surface prior

to installation. An alcohol pad works well to

remove oils

SPT-2VW-1

SPT-2VW-1

SPT-2VW-1

SPT-2VW-1

SPT-2VW-1

SPT-2VW-1

SPT-2VW-1

LED•TPL•KIT

LED•TPL

LED•TPLSP

LED Puck Light

LED•PCK1

LED•PCK3•KIT

• Kit includes: (3) LED Puck Lights (LED•PCK1)

(1) DayBreak Dimmable Driver 18W

(LED•DDR18)

(2) 8’ Power Extension Cables (LED•PEC8)

• One light with 8’ power cable; 2.4W

• Warm white illumination

• 12 degree directional swivel

• 144 lumens; 70 degree beam angle

• For surface mount or recess installation

• Units are 2 9/16” diameter. Requires 2 1/4”

diameter circle cut out for recess installation

• Use 8’ power extension cables (LED•PEC8) to

extend the distance between lights and power

supply

Under Cabinet Panel (PUCP, UCP

OR UCPWA) provides a clean, built-

in look for under cabinet installation

LED•PCK1

SPT-2VW-1

SPT-2VW-1

SPT-2VW-1

SPT-2VW-1

SPT-2VW-1

SPT-2VW-1

SPT-2VW-1

LED•PCK3•KIT

LED Light Sources

ncG1vNJzZmirY2Ourq3ZqKWar6NjsLC5jn%2Bjoqignruojs6oooysn6euqLGOhpiro5Wptq%2Bzjmtnam5fZ31ygoRrZ4SqkZvBjq3InVxraIOlsqRxkWl5qKebWn9xeYRrZ4Wnp5rAcLLIpZysZ5GowKbA0miZmquZmHqpwMylZqmZl5qBeYWNoaumpA%3D%3D